CONTACT US

Our Address

Science Avenue, High-tech Zone, Zhengzhou City, Henan Province, China

  • Separation sorting technology for recycling incineration ...

    High moisture levels and a metal content to which, predominantly, other material adheres demands a separation technology specially designed for the purpose. As an alternative, dry procedures are used for the ash removal in which metal separation in the fine grain range can generally be

  • Wet or dry separation Waste Management World

    Deep dry recovery of metal particles (>4 mm) by dry physical methods, followed by use of the residue in infrastructure (Denmark). Wet treatment of the bottom ash to remove organics and metals down to 0.1 mm, producing at the same time a clean aggregate for the building industry (the Netherlands).

  • Waste to Energy Recycling Collection and Handling Innovations in Waste Biowaste Subscribe
  • Metal recovery from incineration bottom ash: State-of-the ...

    The total metal recovery, including non-ferrous metals, iron scrap and stainless steel, is 11.85 % of the input IBA. The company claimed an Au content of 50 mg/kg and an Ag content of 900 mg/kg in the HNFe particles smaller than 4 mm, and about two-third of the revenues from this fraction come from its precious metals

  • Cited by: 3
  • LIMS dry drum - Metso

    1) for low speed, stainless steel with a replaceable wear cover of rubber, polyurethane or stainless steel and, 2) for high speed, reinforced plastic with rubber or polyurethane wear protection. The magnetic drum assembly is contained in a dust proof housing with an opening at the bottom for discharge of both magnetic and nonmagnetic products.

  • Modelling of material recovery from waste incineration ...

    Heavy non-magnetic metals including stainless steel can also be recovered by density separation (Pfandl et al., 2018, Pfandl et al., 2019, Stockinger, 2016). Sieves are applied in bottom ash treatment because ECS are more efficient when their feed has a small particle size range ( Bunge, 2017 ) and to generate aggregates with different ...

  • Cited by: 2
  • IBA-, WEEE-, Alu-, Stainless steel-Sorting WMS ...

    Dry processing has been the main focus of the research and development at WMS Technology Group. Aluminum separation is the logical development based on the earlier processes such as the sorting and separation of stainless steel, cables and non-ferrous metals.

  • Metal separation plant - Recco

    Metal separation at Recco Emmeloord. In our facility in Emmeloord, we have engineered a unique dry metal separation installation with a capacity of 600 tons per week. For our relations, we recycle the non ferrous mixed streams into single streams of heavy metals and

  • Non-ferrous metal recycling: Recovery of non-ferrous ...

    Regardless of whether it's non-ferrous metal recovery from waste incineration ash, e-waste, shredder operation or dry-mechanical sorting of mixed metal-bearing residues. The product (ZORBA) from this non-ferrous separator is a valuable input to further separate and upgrade the inherent non-ferrous metals.

  • Non-ferrous metal recycling: Recovery of non-ferrous ...

    Regardless of whether it's non-ferrous metal recovery from waste incineration ash, e-waste, shredder operation or dry-mechanical sorting of mixed metal-bearing residues. The product (ZORBA) from this non-ferrous separator is a valuable input to further separate and upgrade the inherent non-ferrous metals.

  • SORTECH.IT - BEST solution for PLASTIC RECYCLING - Perfect ...

    Aug 12, 2019  12/08/19 ENGLISH The best solution for dry refining of recycled plastic and PET. Perfect cleaning and separation of: dust, films, paper, iron, stainless steel, aluminium and non-ferrous metals.

  • 作者: Sortech .IT
  • COGELME - Ferrous and non-ferrous metals, stainless steel ...

    Sep 02, 2015  PET flakes and other plastics recycling and purification from metals, dry process. Separation at 100% of: Iron, Stainless Steel, Aluminium and other Non-Ferrous Metals. We provide free test with ...

  • 作者: COGELME - Metal Separators and Glass Crushers
  • Modelling of Material Recovery From Waste Incineration ...

    The highest recovery of metals (up to 8640 ± 820 Mg/a iron, 1530 ± 220 Mg/a aluminium, 627 ± 73 Mg/a stainless steel and 608 ± 70 Mg/a heavy non-ferrous metals) can be achieved in plants that apply comminution before any ageing processes and are equipped with jiggers, inductive sorting systems and/or a high number of eddy current separators.

  • Metal Types and Recycling Process

    Jun 25, 2019  Such separation takes more technologically advanced and sophisticated recycling equipment. These days, in large recycling facilities, the use of sensors to identify metals through infra-red scanning and x-ray has become popular. Three common categories of metal sensing processes include biotechnology, hydrometallurgy, and pyrometallurgy.

  • How to Prevent Galvanic Corrosion Between Carbon and ...

    Carbon steel and stainless steel are both iron-based metals, but carbon steel has an especially high content of carbon. This makes carbon steel notably strong, heavy, and hard. However, carbon steel is vulnerable to corrosion. That’s because it’s made of iron, and it’s easy for oxygen to corrupt iron. The result is iron oxide, or rust ...

  • Wet physical separation of MSWI bottom ash

    For example, the MSWI bottom ash produced by the incinerator at Amsterdam contains materials such as non-ferrous metals (2.3%), ferrous metals (8-13%), gold (0.4 ppm), silver (10 ppm), stainless ...

  • CLEANING AND DESCALING STAINLESS STEELS

    stainless steels. Complete separation of these two meanings of passivation is not ... acids. Also, stainless steel parts that have been sensitized by welding or thermal treatment, or parts in a highly stressed condition, may be more ... protective oxide film on stainless steel and thus lay the underlying metal open to corrosive attack.

  • X-ray fluorescence sorting of non-ferrous metal fractions ...

    The non-ferrous metal fractions were divided and subjected to (i) a washing process, (ii) dry abrasion and (iii) no mechanical pre-treatment to study the effect of resulting different surface properties on a subsequent X-ray fluorescence sorting into precious metals, zinc, copper, brass, stainless steel and a

  • Metals - Applications - Tata Chemicals Limited

    The granular soda ash manufactured by TCL is a high-quality product which is used in the steel industry to remove sulphur from iron ore, give fluidity to slag, and smoothen blast furnace operations during the manufacture of iron and steel. We are also a major supplier of light soda ash to the aluminium industry.

  • Metals Special Issue : Separation and Leaching for ...

    Dry gravity separation using a vibrating zirconia ball bed is proposed in this study to separate aluminum (Al) and stainless steel (STS) scraps obtained from spent hard disk drive recycling. The effects of zirconia ball sizes and vibrating power (vibration amplitude) on the separation efficiency of Al and STS scraps were investigated.

  • Shop-Vac 4041300 Ash Vacuum, Stainless Steel, 5 gallon ...

    Stainless Steel Finish Stainless-Steel Material Stainless Steel Voltage 120 Volts Wattage 756 watts Item Package Quantity 1 Cord Length 72 Inches Measurement System Metric Special Features Corded Included Components Ash Vacuum, metal intake nozzle, metal crevice tool, pellet stove kit, owners manual, wire wound hose, HEPA cartridge filter

  • 评论数: 167
  • MARTIN Slagline Dry bottom ash discharge + treatment

    The downstream screener separates the bottom ash into two fractions. Coarse bottom ash components are processed by the sorting unit. The residual fraction is conveyed to the grading and separation equipment, which is designed for highly efficient extraction of ferrous and non-ferrous metals, stainless steel and, optionally, glass.

  • Magnetic Separation Bunting - Redditch

    Robust permanent Drum Magnets designed for continuous separation of weak and ferro magnetic materials from dry, free-flowing non-magnetics. Drum Magnets - Permanent Heavy duty Electro Drum Magnets for recovering large ferrous metals from automobile frag, steel slag, incineration ash, and mixed general refuse.

  • Metals Special Issue : Separation and Leaching for ...

    Dry gravity separation using a vibrating zirconia ball bed is proposed in this study to separate aluminum (Al) and stainless steel (STS) scraps obtained from spent hard disk drive recycling. The effects of zirconia ball sizes and vibrating power (vibration amplitude) on the separation efficiency of Al and STS scraps were investigated.

  • Shop-Vac 4041300 Ash Vacuum, Stainless Steel, 5 gallon ...

    Stainless Steel Finish Stainless-Steel Material Stainless Steel Voltage 120 Volts Wattage 756 watts Item Package Quantity 1 Cord Length 72 Inches Measurement System Metric Special Features Corded Included Components Ash Vacuum, metal intake nozzle, metal crevice tool, pellet stove kit, owners manual, wire wound hose, HEPA cartridge filter

  • 评论数: 167
  • MARTIN Slagline Dry bottom ash discharge + treatment

    The downstream screener separates the bottom ash into two fractions. Coarse bottom ash components are processed by the sorting unit. The residual fraction is conveyed to the grading and separation equipment, which is designed for highly efficient extraction of ferrous and non-ferrous metals, stainless steel and, optionally, glass.

  • Magnetic Separation Bunting - Redditch

    Robust permanent Drum Magnets designed for continuous separation of weak and ferro magnetic materials from dry, free-flowing non-magnetics. Drum Magnets - Permanent Heavy duty Electro Drum Magnets for recovering large ferrous metals from automobile frag, steel slag, incineration ash, and mixed general refuse.

  • Amazon: pellet stove vacuum

    Ash Vacuum TACKLIFE 5 Gallon 800W Fireplace Vacuum with Blow fonction, 1.2M Metal Hose, 5M Power Cable, for use with Fireplaces, Wood Stoves, Ash Collectors, and Pellet Stoves 3.6 out of 5 stars 11 $38.50 $ 38 . 50

  • NENon- ferrous metal separator for very fine materials

    The ash contains up to six percentiron and up to three percent non-ferrous metals.However, the particles are very small, measuringonly 0.5 – 4 mm. ... including high carbon steel, stainless steel, aluminium, brass, copper, lead... more. Issue 2019-03 One-stop custom ... More and more recyclers are considering mobile metals separation from ...

  • ash separation, ash separation Suppliers and Manufacturers ...

    Alibaba offers 1,302 ash separation products. About 2% of these are Mineral Separator, 4% are Separation Equipment. A wide variety of ash separation options are available to you, such as condition, local service location, and applicable industries.

  • Dissimilar Metals in Contact American Galvanizers ...

    Hot-dip galvanized steel is well suited for use in a variety of environments and fabrications, and sometimes is placed in contact with different metals including, among others, stainless steel, aluminum, copper and weathering steel.. When two different metals are in contact in a corrosive environment, one of the metals experiences accelerated galvanic corrosion while the other metal remains ...

  • Eddy Current Separators - Walker Magnetics

    Eddy current separation is based on the use of a magnetic rotor with alternating polarity, spinning rapidly inside a non-metallic drum driven by a conveyor belt. As non-ferrous metals pass over the drum, the alternating magnetic field creates eddy currents in the non-ferrous metal particles repelling the material away from the conveyor.

  • Wet physical separation of MSWI bottom ash - CORE

    Abstract. Bottom ash (BA) from municipal solid waste incineration (MSWI) has high potential for the recovery of valuable secondary materials. For example, the MSWI bottom ash produced by the incinerator at Amsterdam contains materials such as non-ferrous metals (2.3%), ferrous metals (8-13%), gold (0.4 ppm), silver (10 ppm), stainless steel (0.1%) and minerals that can be converted into ...

  • Alloy selection for service in chlorine, hydrogen chloride ...

    Carbon steel resists dry chlorine and traces of moisture merely leave a film of ferric chloride. Chlorine is a powerful oxidant, however, and steel can ignite in dry chlorine, depending upon form and temperature. For example, steel wool or wire can ignite at as low as 50 °C (122 °F). Steel

  • Eddy Current Separator / Separation Manufacturer, Supplier ...

    Stainless steel, copper, aluminum, brass from shredder residue and fluff. Non-ferrous metal recovery in refuse streams and ash streams in Waste-to-Energy facilities. Separation of non-ferrous chips. Aluminum scrap recovery in foundry sand reclamation. Glass cullet recycling. Wood waste processing. Aluminium extrusion recycling.

  • MAGNETIC DRUM SEPARATOR magnetic separation equipment

    Sep 12, 2019  Magnetic Drum Separator: Dry drum separators have been developed mainly for dry separation of ferromagnetic ores with particle sizes finer than 20 mm. In addition to this conventional application, the dry drum separator has found a wide range of other applications such as: Iron and steel slag treatment; Reduced pyrite ash separation

  • METHOD AND UNIT FOR THE SEPARATION OF NON-FERROUS METALS

    Nov 11, 2010  METHOD AND UNIT FOR THE SEPARATION OF NON-FERROUS METALS AND STAINLESS STEEL IN BULK MATERIAL HANDLING . United States Patent Application 20100282646 . Kind Code: A1 . Abstract: A method and unit for the separation of non-ferrous, ferrous and non-metal portions in bulk material handling, particularly for the recycling of materials for ...

  • Alloy selection for service in chlorine, hydrogen chloride ...

    Carbon steel resists dry chlorine and traces of moisture merely leave a film of ferric chloride. Chlorine is a powerful oxidant, however, and steel can ignite in dry chlorine, depending upon form and temperature. For example, steel wool or wire can ignite at as low as 50 °C (122 °F). Steel

  • Eddy Current Separator / Separation Manufacturer, Supplier ...

    Stainless steel, copper, aluminum, brass from shredder residue and fluff. Non-ferrous metal recovery in refuse streams and ash streams in Waste-to-Energy facilities. Separation of non-ferrous chips. Aluminum scrap recovery in foundry sand reclamation. Glass cullet recycling. Wood waste processing. Aluminium extrusion recycling.

  • MAGNETIC DRUM SEPARATOR magnetic separation equipment

    Sep 12, 2019  Magnetic Drum Separator: Dry drum separators have been developed mainly for dry separation of ferromagnetic ores with particle sizes finer than 20 mm. In addition to this conventional application, the dry drum separator has found a wide range of other applications such as: Iron and steel slag treatment; Reduced pyrite ash separation

  • METHOD AND UNIT FOR THE SEPARATION OF NON-FERROUS METALS

    Nov 11, 2010  METHOD AND UNIT FOR THE SEPARATION OF NON-FERROUS METALS AND STAINLESS STEEL IN BULK MATERIAL HANDLING . United States Patent Application 20100282646 . Kind Code: A1 . Abstract: A method and unit for the separation of non-ferrous, ferrous and non-metal portions in bulk material handling, particularly for the recycling of materials for ...

  • Yuhong Gold Mining Machine Dry Magnetic Drum Separator For ...

    Low intensity dry drum magnetic separator is suitable for: Separation of ferromagnetic ores with particle sizes finer than 20 mm. Iron and steel slag treatment Reduced pyrite ash separation Calcined ilmenite production Metal powder production Supergrade magnetic concentrate production Removal of ferromagnetic particles prior to High

  • stainless steel separation (Waste Separation - Waste and ...

    Results for stainless steel separation (waste separation) services from leading brands. Compare and contact a supplier near you (waste and recycling)

  • Nippon Magnetics,Inc. LOCAT ION MAGNETIC SEPARATORS

    Food processing factories require stainless steel for almost all production lines, so the metal contaminates are generally stainless material. Nonmagnetic austenite family, SUS304 or 316L can be attracted by magnets if shocked (cutting, shredding, twisting, grinding, pressing buffing and polishing), welding or rubbing are involved. Deformation

  • Stainless Steel Separation : Nippon Magnetics USA

    Stainless Steel Separator. Processing of food, powders and wood chips utilized grinding and milling which can leave fine flakes or broken parts such as nails, bolts and nuts in the product. The HGMP is designed specifically to remove these products and return the product to its pure state.

  • Belt magnetic separators for ferrous metals separation: Elega

    Continuous and batch mixers various for dry and wet mixes. ... Incineration ash; Any other substances where there are used for further processing of ferrous metals. ... Induction separation system for stainless steel, other metals separation. The induction separation system for stainless steel (other metals

  • Wet physical separation of MSWI bottom ash (2010) www ...

    For example, the MSWI bottom ash produced by the incinerator at Amsterdam contains materials such as non-ferrous metals (2.3%), ferrous metals (8-13%), gold (0.4 ppm), silver (10 ppm), stainless steel (0.1%) and minerals that can be converted into building products such as aggregates utilized for concrete, asphalt, etc.

  • An Overview of Recovery of Metals from Slags

    While Cr(VI) is a concern for human health and the environment, chromium is a valuable metal, and therefore, chromium-containing slags from steel production can be considered a secondary source of ...

  • Methods of Plating Stainless Steel Sciencing

    Plating is a centuries-old technique that changes the surface properties by placing a coating over the metal underneath. Whereas plating is commonly done to prevent corrosion, stainless steel, with its high chromium content of 10 percent to 11 percent, is inherently resistant to corrosion, stains, and rust, though it is not completely stain-proof.. Plating is also done for aesthetic reasons ...

  • Metal Separation Equipment

    Survey of Metal Recovery in the US WTE IndustryColumbia. industry was a survey to determine the type of equipment used for metal recoveryat the tipping floor at mass burn facilities, to front-end recovery at RDF plants, to metal separation from . grizzly scalper is operated in front of the magnetic.

  • Stainless Steel Chemical Compatibility Chart

    Stainless Steel Chemical Compatibility Chart: Check the chemical compatibility of Stainless Steel with various chemicals, solvents, alcohols and other products.. Shop Stainless Steel. Please Note: The information in this chart has been supplied by reputable sources and is to be used ONLY as a guide in selecting equipment for appropriate chemical compatibility.